Is your ironing board ugly, gross, or worn out? Or are you like me and just bought a cheap one from Walmart and now everything you iron has the pattern of the metal base firmly pressed into it?
Well, luckily for you, there's something you can do about it without throwing out your old one and it's not even hard. It just takes 10 steps.
For this project, you will need:
~cotton fabric*
~insulated/heat resistant batting**
~matching thread (preferably a cotton thread from a reliable brand like Mettler or Guetterman)
~straight pins
~cording***
~your ironing board
~fabric marker or chalk
~tape measure (potentially useful, but you can eyeball if you're confident)
*You'll need a piece that's the length and width of your ironing board + about 6" (15 cm)
**You'll need a piece that's the length and width of your ironing board + about 4" (10 cm)
***Enough for the perimeter of your ironing board plus enough to tie it (at least a foot/30 cm)
I just left my ironing board as was and added this extra cover to it because there was nothing wrong with the original ironing cover; it was just too thin and kind of ugly. You may wish to remove your original cover for whatever reason. If you do, you may be able to salvage and use the original insulator (usually looks like a foam) or you may not. If you're not keeping the old insulation, you may want to use two layers of insulated batting when making your new cover. If the old insulation is thick enough on its own, you don't need any insulated batting and can just recover with a new fabric. It's up to you.
1. Lay your ironing board face down on top of your insulated batting (shiny side down - I have it wrong in this picture, sorry :/) and trace around it, leaving an excess of about 2" all around. Cut out your batting.
2. Lay your batting on top of your fabric and trace around it, leaving an excess of about 1". Cut out your fabric.
3. Put your batting aside for a few minutes and pin a 1/2" hem around the entire perimeter of your fabric.
Should look something like this.
4. Sew your hem in place.
5. Put your batting back (shiny side facing the wrong side of your fabric), pin it in place and then sew it in place.
Be sure to fix your stitch at the beginning and end and to take out your pins before you sew over them.
The gap between the edge of your fabric and the edge of your batting should be at least 1/2" wide. I made mine a bit larger but found that that was unnecessary although harmless.
5.5 *This step is optional* Use a ruler to draw lines every 5" or so and then sew along these lines.
This connects your fabric to your batting more securely. It's not necessary but I did it so that I could remove and wash the ironing cover in the future without having to worry about the batting coming apart. If you plan on washing your cover in a machine, you should do this, but I find most people go their whole lives without washing their ironing board covers. It's up to you.
6. Now place your cording along the edge of your batting.
7. Fold over your fabric and pin it in place.
8. Now sew down the fold. Be sure not to sew over your cord. Because of the shape of your ironing board, you may have to gather your fabric a bit. Don't worry, you won't be able to see it from the front.
9. Place your ironing board on top of your cover. (You're almost done!)
10. Tighten and tie the cord so that it fits snugly. I tied my cord to one of the metal bars on the board's frame but that may not be necessary.
And there you are! A brand new and totally unique ironing board.
I chose this fabric because it's off-white and looks antique. I figure that, as I spilled Best Press and what-have-you on the cover, it would just add to the antique look.
If you like what you've read, you may want to follow my blog (which you can do on the side bar to the right), read my other blog posts and/or check out my profiles on other sites:
Facebook
Thank-you for reading. Don't hesitate to leave a comment if you have a question, correction, or just want to tell me how fantastic I am.
Happy sewing!
Thank-you for reading. Don't hesitate to leave a comment if you have a question, correction, or just want to tell me how fantastic I am.
Happy sewing!
No comments:
Post a Comment